TRS-9002CAG资料

Optoway TRS-9002CG

TRS-9002CG / TRS-9002CTG / TRS-9002CFG

5V / 1310 nm / 2.5 Gbps RoHS Compliant Optical Single-Mode Transceiver

FEATURES

l Duplex SC Single Mode Transceiver: TRS-9002CG l Duplex ST Single Mode Transceiver: TRS-9002CTG l Duplex FC Single Mode Transceiver: TRS-9002CFG l SONET OC-48 SR / SDH STM-16 (I-16) Compliant l Fiber Channel 2X/1X SM-LC-L FC-PI Compliant l IEEE 802.3z Gigabit Ethernet 1000BASE-LX Compliant

l Industry Standard 1 x 9 Footprint l 0 to 70oC Operating : TRS-9002CG l -40 to 85oC Operating : TRS-9002CAG l Single +5 V Power Supply l RoHS Compliant

l TTL Signal Detect Output

l Wave Solderable and Aqueous Washable

l Class 1 Laser International Safety Standard IEC 60825 Compliant

1

**********************************************************************************************************************************************************************

*********************************************************************************************************************************************************************

DESCRIPTION

APPLICATIONS

l Switch to Switch Interface

l High Speed Interface for File Servers l High Performance Desktops

The TRS-9002CG series single mode transceivers is low power, high performance module for bi-directional serial optical data communications such as SONET OC-48 SR / SDH STM-16 (I-16), Gigabit Ethernet and 1X/2X Fiber channel. This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A LVPECL logic interface simplifies interface to external circuitry.

LASER SAFETY

This single mode transceiver is a Class 1 laser product. It complies with IEC 60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.

ORDER INFORMATION P/No. Bit Rate SONET

(Mb/s) 2488

2488

/SDH

TRS-9002CG TRS-9002CAG

SR/I-16 SR/I-16

Distance Wavelength Voltage (km) (nm) (V) 2 2

1310 1310

5 5 TX RX Sens. RoHS Power (dBm) Compliant (dBm)

1X9 SC/ST/FC 0 to 70 -3 to -9.5 -18 Y 1X9 SC/ST/FC -40 to 85 -3 to -9.5 -18 Y

Package

Temp.

(oC)

Note: TRS-XXXXXFG for FC duplex transceiver, TRS-XXXXXTG for ST duplex transceiver, TRS-XXXXX-EMG for SC duplex

transceiver with extended EMI shielding,

Absolute Maximum Ratings

Parameter

Storage Temperature Operating Temperature Soldering Temperature Power Supply Voltage Input Voltage Output Current

Symbol Tstg Topr --- Vcc --- Iout

Min -40 0 -40 0 GND 0

Max 85 70 85 260 6 Vcc 30

Units oC oC

o

Notes

TRS-9002CG TRS-9002CAG

10 seconds on leads only

C V V

mA

Recommended Operating Conditions

Parameter

Power Supply Voltage Operating Temperature Data Rate

Power Supply Current

Symbol Vcc Topr Icc

Min 4.75 0 -40 622

Typ 5 2488 180

Max 5.25 70 85 2670 240

Units V

o

C / TRS-9002CG o

C / TRS-9002CAG

Mb/s mA

***********************************************************************************************************************************************************************

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303

Tel: 886-3-5979798 Fax: 886-3-5979737

E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2006 V1.0 元器件交易网www.cecb2b.com

Optoway

Parameter

TRS-9002CG

2

***********************************************************************************************************************************************************************

Transmitter Specifications (0oC < Topr < 70oC, 4.75V < Vcc < 5.25V)

Symbol

Min

Typ --- 1310 --- ---

Max -3 1360 3 --- 150 150 -120 350 1600 -1.58 -0.74

Units dBm nm nm dB ps ps dB/Hz µA µA mV V V

Notes 1

RMS (σ)

20% to 80% Values 20% to 80% Values

2 2

Optical

Optical Transmit Power Output Center Wavelength Output Spectrum Width Extinction Ratio Output Eye

Optical Rise Time Optical Fall Time

Relative Intensity Noise Electrical

Data Input Current – Low Data Input Current – High Differential Input Voltage Data Input Voltage – Low Data Input Voltage -- High

Po -9.5

1270 λ

--- ∆λ

ER 8.2

Compliant with IEEE 802.3z

tr tf RIN

IIL IIH VIH - VIL VIL - VCC VIH - VCC

-350 300 -2.0 -1.1

Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber.

2. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.

Receiver Specifications (0oC < Topr < 70oC, 4.75 V < Vcc < 5.25V)

Parameter

Optical Sensitivity

Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Electrical

Data Output Voltage – Low Data Output Voltage – High

Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Symbol --- Pin Pa Pd VOL - VCC VOH - VCC VSDL VSDH

Min --- -3 --- -30 1.0 1260 -2.0 -1.1 2.0

Typ --- --- --- --- ---

Max -18 --- -18 --- 1600 -1.58 -0.74 0.5

Units dBm dBm dBm dBm dB nm V V V V

Notes 1

Transition: low to high Transition: high to low

2 2

Notes: 1. Minimum sensitivity and saturation levels at BER=1E-10 for a 223-1 PRBS.

2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs.

***********************************************************************************************************************************************************************

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303

Tel: 886-3-5979798 Fax: 886-3-5979737

E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2006 V1.0

元器件交易网www.cecb2b.com

Optoway

TRS-9002CG

3

***********************************************************************************************************************************************************************

CONNECTION DIAGRAM

Receiver Signal Ground 1 (Rx GND) Receiver Data Out 2 (RD+) N/C Receiver Data Out Bar 3 (RD−) Signal Detect 4 (SD)

Receiver Power Supply 5 (Rx Vcc) TOP VIEW Transmitter Power Supply 6 (Tx Vcc) Transmitter Data In Bar 7 (TD−)

Transmitter Data In 8 (TD+) N/C Transmitter Signal Ground 9 (Tx GND) PIN 1 2 3 4 5 6 7 8 9 Symbol Rx GND RD+ RD− SD Rx Vcc Tx Vcc TD− TD+ Tx GND Notes Directly connect this pin to the receiver ground plane See recommended circuit schematic See recommended circuit schematic Active high on this indicates a received optical signal +5V dc power for the receiver section +5V dc power for the transmitter section See recommended circuit schematic See recommended circuit schematic Directly connect this plan to the trransmitter ground plane RECOMMENDED CIRCUIT SCHEMATIC TransceiverTX GND0.1uFLDDriver100R0.1uF610nF510nF43Z=50RRD+2Z=50RR3RX GND1R4100R10uF10uF1uHTD+TD-98Z=50R7Z=50RR1R2PECLTX VCCVCC1uHRX VCCSD (TTL)SDRD-POSTAmpPECLFor Vcc=5V, R1=R2=R3=R4= 330R The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc and Tx Vcc. A GND plane under the module is required for good EMI and sensitivity performance. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2006 V1.0 元器件交易网www.cecb2b.com

Optoway

Units in mm

TRS-9002CG

4

***********************************************************************************************************************************************************************

PACKAGE DIAGRAM

1) SC Type With Extended Shielding TX OPTICALRX OPTICAL TRS-9002C-EMG / TRS-9002AC-EMG 2) SC Type With Flat Extended Shielding TX OPTICALRX OPTICAL TRS-9002C-EM1G / TRS-9002AC-EM1G ***********************************************************************************************************************************************************************

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303

Tel: 886-3-5979798 Fax: 886-3-5979737

E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2006 V1.0

元器件交易网www.cecb2b.comOptoway3) ST Type TRS-9002CG 5 *********************************************************************************************************************************************************************** TX OPTICALRX OPTICAL TRS-9002CTG / TRS-9002ACTG 4) FC Type 12.7TX OPTICALRX OPTICAL2.54*820.3225.413.9105.9710.1820.3234.5MAX0.75O1.313.7 TRS-9002CFG / TRS-9002ACFG Note: Specifications subject to change without notice. ***********************************************************************************************************************************************************************

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303

Tel: 886-3-5979798 Fax: 886-3-5979737

E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2006 V1.0