LXHL-DW03资料

来源：宝玛科技网

元器件交易网www.cecb2b.com

Preliminary Technical Datasheet DS40

power light source

LUXEONV Portable

Introduction

LUXEON®is a revolutionary, energy efficient and ultra compact newlight source, combining the lifetime and reliability advantages of LightEmitting Diodes with the brightness of conventional lighting.The LUXEON V Portable, part of the LUXEON V family, delivers whiteluminous output 100 times brighter than standard small signal LEDsand 4X that of a standard LUXEON.

LUXEON V Portable is designed for portable lighting products such as flashlights, \"miner\" head󰀋mounted lights, emergency󰀋egresslighting, and other battery󰀋operated applications. This device offersruggedness, low power consumptions, and lifetimes greater than 50X conventional flashlight sources—over 500 hours compared to the typical 20󰀋hour life for an incandescent bulb.

Features

󰂌Highest Flux LED in the world—50X traditional \"5mm\" LEDs,and 4X a standard LUXEON.󰂌500+ hours operation comparedto just 20 hours for typical incandescent flashlight bulbs.󰂌Extreme Luminous Density—20Xthe lm/mm2of a standardthrough hole LED

󰂌More Energy Efficient thanIncandescent and most Halogen lamps

󰂌Low voltage DC operated󰂌Cool beam, safe to the touch󰂌Instant light (less than 100 ns)󰂌Fully dimmable󰂌No UV

󰂌Superior ESD protection

󰂌Uniform angular color uniformitysuperior to other solid statesources, eliminating color haloswithin the light beam

Benefits

󰂌Compact low voltage lightsource for portable lighting applications

󰂌Highly efficient source results inlonger battery life

󰂌Solid state technology eliminatesfragile filament resulting inextremely rugged designs󰂌Much longer life than conven󰀋tional light bulbs enables sealedfor life designs

元器件交易网www.cecb2b.com

Table of Contents

Mechanical Dimensions — Emitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Mechanical Dimensions — Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Part Number Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Flux Characteristics at 700mA, Junction Temperature, TJ= 25ºC . . . . . . . . . . . . . . . . . . . . .4Electrical Characteristics at 700mA, Junction Temperature, TJ= 25ºC . . . . . . . . . . . . . . . . .5Optical Characteristics at 700mA, Junction Temperature, TJ= 25ºC . . . . . . . . . . . . . . . . . . .5Absolute Maximum Ratings 󰀃 Emitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Wavelength Characteristics, TJ= 25ºC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Forward Current Characteristics, TJ= 25ºC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Current Derating Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Representative Typical Spatial Radiation Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

LUXEON VPortable Datasheet DS40 (8/06)2

元器件交易网www.cecb2b.com

Mechanical Dimensions —Emitter

Lambertian 󰀃 LXHL󰀃PW03

Notes:

1. The anode side of the device is denoted by a hole in the lead frame. Electrical insulation between the case and the board is

required—slug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug.2. Drawings not to scale.

3. All dimensions are in millimeters.

4. All dimensions without tolerances are for reference only.

Side Emitting 󰀃 LXHL󰀃DW03

Notes:

1. The anode side of the device is denoted by a hole in the lead frame. Electrical insulation between the case and the board is

required—slug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug.2. Drawings not to scale.

3. All dimensions are in millimeters.

4. All dimensions without tolerances are for reference only.

LUXEON VPortable Datasheet DS40 (8/06)3

元器件交易网www.cecb2b.com

Mechanical Dimensions —Star

Lambertian—LXHL󰀃LW6C and Side Emitting—LXHL󰀃FW6C

Side Emitting

Lambertian (High Dome)

Notes:

1.Slots in aluminum󰀋core PCB for M3 or #4 mounting screw.

2.Electrical interconnection pads labeled on the aluminum󰀋core PCB with \"+\" and \"󰀋\" to denote positive and negative,

respectively. All positive pads are interconnected, as are all negative pads, allowing for flexibility in array interconnection.3.Electrical insulation between neighboring Stars is required – aluminum board is not electrically neutral.4.Drawings not to scale.

5.All dimensions are in millimeters.

Part Number Matrix

Table 1.

Part NumberLXHL󰀋PW03LXHL󰀋LW6CLXHL󰀋DW03LXHL󰀋FW6C

Beam PatternLambertianLambertianSide EmittingSide Emitting

ConfigurationEmitterStarEmitterStar

Drive Current700 mA700 mA700 mA700 mA

Flux Characteristics at 700mA, Junction Temperature, TJ= 25ºC

Table 2.

LUXEONVLXHL󰀋PW03LXHL󰀋LW6CLXHL󰀋DW03LXHL󰀋FW6C

ConfigurationEmitterStarEmitterStar

RadiationPatternLambertianLambertianSide EmittingSide Emitting

Minimum Luminous

Flux (lm)ΦV

[1,2]Typical Luminous

Flux (lm)ΦV

[2]

87.487.487.487.4

120120105105

Notes for Table 2:

1.Minimum luminous flux or performance guaranteed within published operating conditions. Philips Lumileds maintains a

tolerance of ± 10% on flux measurements.

2.LUXEON types with even higher luminous flux levels will become available in the future. Please consult your Philips

Lumileds Authorized Distributor or Philips Lumileds sales representative for more information.

LUXEON VPortable Datasheet DS40 (8/06)

元器件交易网www.cecb2b.com

Electrical Characteristics at 700mA, Junction Temperature, TJ= 25ºC

Table 3.

Part NumberLXHL󰀋PW03LXHL󰀋DW03LXHL󰀋LW6CLXHL󰀋FW6C

Forward Voltage VF

(V)

Min.Typ.Max.5.435.435.435.43

6.846.846.846.84

8.318.318.318.31

[1]

DynamicResistance [2]

(Ω) RD

1.01.01.01.0

Temperature Coefficientof Forward Voltage [3]

(mV/ºC)ΔVF/ ΔTJ

󰀋4.0󰀋4.0󰀋4.0󰀋4.0

Thermal Resistance,Junction to Slug or Case

(ºC/W) RθJ󰀋C

881111

Notes for Table 3:

1.Philips Lumileds maintains a tolerance of ± 0.06V on forward voltage measurements.

2.Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs. See Figures 3.3.Measured between 25°C ≤TJ≤110°C at IF= 700mA.

Optical Characteristics at 700mA, Junction Temperature, TJ= 25ºC

Table 4.

Radiation PatternLambertianSide Emitting

ColorWhiteWhite

Min.4500 K4500 K

Color Temperature CCT [1]

Typ.

5500 K5500 K

Max.10,000 K10,000 K

Notes for Table 4:

1.CRI (Color Rendering Index) for White product types is 70. Philips Lumileds maintains a ± 5% tester tolerance on CCT.2.All products built with Indium Gallium Nitride (InGaN).

Optical Characteristics at 700mA, Junction Temperature, TJ= 25ºC, Cont’d

Table 5.

Radiation PatternLambertian

ColorWhite

Total IncludedAngle [1](degree)

θ0.90V

150

Viewing Angle [2]

(degree)2θ1/2

120

Notes for Table 5:

1.Total angle at which 90% of total luminous flux is captured.

2.θ½ is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.

Optical Characteristics at 700mA, Junction Temperature, TJ= 25ºC, Cont’d

Table 6.

Radiation PatternSide Emitting

ColorWhite

Typical total fluxpercent within first

45º [1]

Cum Φ45º

<30%

Typical angle of peak intensity [2]

θPEAK75º – 85º

Notes for Table 6:

1.Cumulative flux percent within ± 45º from optical axis.

2.Off axis angle from lamp centerline where the luminous intensity reaches peak off axis value. On axis peak may be higher

than off axis peak.

LUXEON VPortable Datasheet DS40 (8/06)5

元器件交易网www.cecb2b.com

Absolute Maximum Ratings 󰀃 Emitter

Table 7.

Parameter

DC Forward Current (mA) [1]

Peak Pulsed Forward Current (mA)Average Forward Current (mA)

ESD Sensitivity [2]

LED Junction Temperature (°C) Aluminum󰀋Core PCB Temperature ( C) [3]

Storage Temperature (°C) Soldering Temperature (°C) [4]

White7001000700± 16,000V HBM

13570󰀋40 to +120260 for 5 seconds max

Notes for Table 7:

1.Proper current derating must be observed to maintain junction temperature below the maximum. For more information,

consult the LUXEON Design Guide, available upon request.

2.LEDs are not designed to be driven in reverse bias. Please consult Philips Lumileds' application brief AB11 for further

information.

3.Allowable maximum board temperature to avoid exceeding maximum junction temperature at maximum Vflimit at 700 mA

based on thermal resistance of Star assembly.

4.Measured at leads, during lead soldering and slug attach, body temperature must not exceed 120°C. LUXEON emitters

cannot be soldered by general IR or Vapor󰀋phase reflow, nor by wave soldering. Lead soldering is limited to selectiveheating of the leads, such as by hot󰀋bar reflow, fiber focussed IR, or hand soldering. The package back plane (slug) maynot be attached by soldering, but rather with a thermally conductive adhesive. Electrical insulation between the slug andthe board is required. Please consult Philips Lumileds' Application Brief AB10 on LUXEON Emitter Assembly Informationfor further details on assembly methods.

Wavelength Characteristics, TJ= 25ºC

Relative Spectral Power Distribution1.00.80.60.40.20.0350400450500550600650700750800WavelengthWavelength (nm)Figure 1. White Color Spectrum of typical CCT part, integrated measurement.

LUXEON VPortable Datasheet DS40 (8/06)6

元器件交易网www.cecb2b.com

Light Output Characteristics

1301201101009080706050

-20

100

120

Junction Temperature, TJ (oC)

Figure 2. Relative Photometric Flux vs. Junction Temperature.

Note:

Driving these high power devices at currents less than the test conditions may produce unpredictable results and may be subjectto variation in performance. Pulse width modulation (PWM) is recommended for dimming effects.

IF - Average Forward Current (mA) 8007006005004003002001000

0.01.02.03.04.05.06.07.08.0VF - Forward Voltage (Volts)

Forward Current Characteristics, TJ= 25ºC

Relative Light Output (%)Figure 3. Forward Current vs. Forward Voltage.

1.2Normalized Relative Radiometric Power10.80.60.40.200100200300400 200 400 600 800IF - Average Forward Current (mA)

Figure 4. Relative Luminous Flux vs. Forward Current at Tj= 25°C maintained.

LUXEON VPortable Datasheet DS40 (8/06)7

元器件交易网www.cecb2b.com

Current Derating Curves

IF - Forward Current (mA) 80070060050040030020010000255075100125150TA - Ambient Temperature (οC) Figure 5. Maximum Forward Current vs. Ambient Temperature derating based on TJMAX= 135°C.

RθJ-A=20oC/WRθJ-A=15oC/W0oC/WRθJ-A=1Representative Typical Spatial Radiation Pattern

Note:

For more detailed technical information regarding LUXEON radiation patterns, please consult your Philips Lumileds AuthorizedDistributor or Philips Lumileds sales representative.

Lambertian Radiation Pattern

100

Relative Intensity (%)9080706050403020100-100

-80

-60

-40

-20

100

Angular Displacement (Degrees)

Figure 6. Representative Typical Spatial Radiation Pattern for LXHL󰀃PW03 and LXHL󰀃LW6C.

LUXEON VPortable Datasheet DS40 (8/06)8

元器件交易网www.cecb2b.com

Side Emitting Radiation Pattern

10090Relative Intensity (%)80706050403020100-120-100-80-60-40-20020406080100120Angular Displacement (Degrees)Figure 7. Representative Typical Spatial Radiation Pattern for LXHL󰀃DW03 and LXHL󰀃FW6C.

Average Lumen Maintenance Characteristics

Table 8.

Heat SinkTemperature

35°C75°C85°C

Drive Current700 mA700 mA600 mA

Average Lumen Maintenance

After 500 Hours of Operation

90%75%65%

Notes for Table 8:

1.LUXEON V Portable is designed primarily for portable lighting and other applications requiring operating lifetimes of

500 hours and less. While the device will operate past 500 hours, its lumen maintenance cannot yet be characterized.Longer life versions of white LUXEON V will become available in the future.

2.Average lumen maintenance is dependant on heat󰀋sink temperature. A recoverable light output loss may occur during

the first 500 hours of operation.

3.For additional information please consult your Philips Lumileds Authorized Distributor or Philips Lumileds sales

representative.

LUXEON VPortable Datasheet DS40 (8/06)9

元器件交易网www.cecb2b.com

Emitter Reel Packaging

Figure 8. Reel dimensions and orientation.

Lambertian Side Emitting Figure 9. Tape dimensions.

Notes:

1.LUXEON V emitters should be picked up by the body (not the lens) during placement. The inner diameter of the pick󰀋up

collet should be greater than or equal to 6.5 mm. Please consult Philips Lumileds Application Brief AB10 on LUXEONEmitter Assembly Informationfor further details on assembly methods.2.Drawings not to scale.

3.All dimensions are in millimeters.

4.All dimensions without tolerances are for reference only.

LUXEON VPortable Datasheet DS40 (8/06)10

元器件交易网www.cecb2b.com